MASUDTEC.COM

2019/04/29

symphony V96 HW2 _V11 FLASH FILE FIRMWARE 1000% Tested MT6580_EMMC_Symphony_V96_8_1_0_2019_04_29_09_48) BY MASUDTEC

symphony V96 HW2 _V11 FLASH FILE FIRMWARE 1000% Tested 




MT6580_EMMC_Symphony_V96_8_1_0_2019_04_29_09_48)




 BY MASUDTEC



 Action : Read Firmware.
 Selected 0-By CPU:MT6580
 Exe version: NCKDongle AndroidMTK 2.5.9.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM26)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) KSI 0x454838454538 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 700100454838454538 : 00000000000000
 EMMC UA SIZE: 0x1c8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1c8c00000      [7.137 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM27)
 Build ID: O11019
 Display ID: V96_HW2_V11
 Version: 8.1.0
 Build Date: Fri Sep 14 15:07:32 CST 2018
 Model: V96
 Brand: Symphony
 Device: V96
 Manufacturer: Symphony
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: 357852091218803
 IMEI[2] from NVRAM: 357852091218811
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start processing lk ......
 Start processing boot 
 Start processing recovery 
 Start processing logo ......
 Start processing odmdtbo
 Reading:  BEGIN: 0x4600000        - LEN: 0x1000000       
 Start processing vendor
 Reading:  BEGIN: 0x6000000        - LEN: 0xaa00000       
 Start processing frp ......
 Reading:  BEGIN: 0x10a00000       - LEN: 0x100000        
 Start processing trustzone
 Start processing nvdata ......
 Reading:  BEGIN: 0x11500000       - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x15a00000       - LEN: 0x600000        
 Start processing system
 Reading:  BEGIN: 0x16800000       - LEN: 0x59000000      
 Saved to : C:\Users\MASUD\Documents\Android_MTK\firmware_backup\MT6580_EMMC_Symphony_V96_8_1_0_2019_04_29_09_48)
 Wait untill phone will start charging.
 [0]All done.






password call 01911218432


 symphony V96 HW2 _V11 FLASH FILE FIRMWARE 1000% Tested MT6580_EMMC_Symphony_V96_8_1_0_2019_04_29_09_48) BY MASUDTEC

2019/04/28

samsung galaxy SM-G355H 4Files (Repair Firmware BY MASUDTEC

samsung galaxy SM-G355H 4Files (Repair Firmware 




BY MASUDTEC


samsung galaxy SM-G355H 4Files (Repair Firmware BY MASUDTEC

VEVO VS-5 FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__VS-5__VS-5__7.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

VEVO VS-5 FLASH FILE FIRMWARE 1000% Tested 





MT6580__lmkj__VS-5__VS-5__7.1__ALPS.L1.MP6.V2_WEG.L_P73





 BY MASUDTEC




VEVO VS-5 FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__VS-5__VS-5__7.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

VEVO VS-5 FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__VS-5__VS-5__7.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

VEVO VS-5 FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__VS-5__VS-5__7.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC


Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B375530304D086BD8C6EC4157
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U7
[eMMC] : FLASH_CID : 1501004B375530304D086BD8C6EC4157
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xD378083F14765C1FF74FE3D0EAEB7418
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : lmkj
ProdName  : VS-5
ProdModel : VS-5
Device    : VS-5
AndroidVer: 7.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_WEG.L_P73

[Read Ok] : preloader_aeon6580_weg_l_l18.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / aeon6580_weg_l_l18 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1319 MiB
Scatter saved to : C:\Users\MASUD\Desktop\New folder (2)\MT6580__lmkj__VS-5__VS-5__7.1__ALPS.L1.MP6.V2_WEG.L_P73\

All done!


password call01911218432


 VEVO VS-5 FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__VS-5__VS-5__7.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC





OPPO R8s FLASH FILE FIRMWARE 1000% Tested MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20 BY MASUDTEC

OPPO R8s FLASH FILE FIRMWARE 1000% Tested




MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20 





BY MASUDTEC


Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E201000004FD4356D
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E201000004FD4356D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID    : 0xD378083F9CC2613735230615701CA833
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : R8s
ProdModel : R8s
Device    : R8s
AndroidVer: 6.0
CU_SWVer  : V1.0.5
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20

[Read Ok] : preloader_magc6580_weg_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_weg_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1107 MiB
Scatter saved to : C:\Users\MASUD\Desktop\New folder (4)\MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20\

All done!



OPPO R8s FLASH FILE FIRMWARE 1000% Teste MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20 BY MASUDTEC



password call 01911218432


 OPPO R8s FLASH FILE FIRMWARE 1000% Teste MT6580__alps__R8s__R8s__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P20 BY MASUDTEC



clone mi note 5s FLASH FILE FIRMWARE Display Fix 1000% Tested MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

clone mi note 5s FLASH FILE FIRMWARE Display  Fix 1000% Tested 




MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73 





BY MASUDTEC




Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201546BEA4122E9
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201546BEA4122E9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD378083F5F2F81F7C496BD75F9786ABA
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : lmkj
ProdName  : Note 5s
ProdModel : Note 5s
Device    : Note 5s
AndroidVer: 8.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_WEG.L_P73

[Read Ok] : preloader_aeon6580_weg_l_l200.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / aeon6580_weg_l_l200 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1142 MiB
Scatter saved to : C:\Users\MASUD\Desktop\mi note 5s\MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73\

All done


clone mi note 5s FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

clone mi note 5s FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

clone mi note 5s FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

clone mi note 5s FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC



password call 01911218432




 clone mi note 5s FLASH FILE FIRMWARE 1000% Tested MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73 BY MASUDTEC

BY MASUDTEC


Display  Fix file link


 clone mi note 5s FLASH FILE FIRMWARE Display  Fix

CKTEL G5 PLUS FLASH FILE FIRMWARE 1000% Tested MT6580__DCHS__G5_Plus__DCHS__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2 BY MASUDTEC

CKTEL G5 PLUS FLASH FILE FIRMWARE 1000% Tested 




MT6580__DCHS__G5_Plus__DCHS__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2




 BY MASUDTEC


Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A39344D12226E8EE6A221
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , M49J1
[eMMC] : FLASH_CID : FE014E50314A39344D12226E8EE6A221
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
[eMMC] : FLASH_UCP : 3736 MiB [eMMC 4 GiB]
DEV RID    : 0xD378083F1C8675F50A335B25CEA58CB4
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : DCHS
ProdName  : G5 Plus
ProdModel : G5 Plus
Device    : DCHS
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 848 MiB
Scatter saved to : C:\Users\MASUD\Desktop\New folder\MT6580__DCHS__G5_Plus__DCHS__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!



CKTEL G5 PLUS FLASH FILE FIRMWARE 1000% Tested MT6580__DCHS__G5_Plus__DCHS__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2 BY MASUDTEC


PASSWORD CALL 01911218432


 CKTEL G5 PLUS FLASH FILE FIRMWARE 1000% Tested MT6580__DCHS__G5_Plus__DCHS__5.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2 BY MASUDTEC


CCIT P8 FLASH FILE FIRMWARE 1000% Tested MT6580__P8__P8__P8__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29 BY MASUDTEC

CCIT P8 FLASH FILE FIRMWARE 1000% Tested 





MT6580__P8__P8__P8__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29 






BY MASUDTEC



Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42015122CCB65201
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42015122CCB65201
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xD378083F52FA3658E1E7E9A1FF7AE3D3
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : P8
ProdName  : P8
ProdModel : P8
Device    : P8
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

[Read Ok] : preloader_b36a_l2q_1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b36a_l2q_1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1592 MiB
Scatter saved to : C:\Users\MASUD\Desktop\CCIT P8\MT6580__P8__P8__P8__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\

All done!


CCIT P8 FLASH FILE FIRMWARE 1000% Tested MT6580__P8__P8__P8__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29 BY MASUDTEC
CCIT P8 FLASH FILE FIRMWARE 1000% Tested MT6580__P8__P8__P8__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29 BY MASUDTEC

CCIT P8 FLASH FILE FIRMWARE 1000% Tested MT6580__P8__P8__P8__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29 BY MASUDTEC

PASSWORD CALL 01911218432


 CCIT P8 FLASH FILE FIRMWARE 1000% Tested MT6580__P8__P8__P8__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29 BY MASUDTEC


2019/04/07

SAMSUNG CLON S8+ FLASH FILE FIRMWARE MT6572_NAND_alps__S8+__c799_q23_a6__5.1__ALPS.KK1.MP7.V1.5 BY MASUDTEC

SAMSUNG CLON S8+ FLASH FILE FIRMWARE 



MT6572_NAND_alps__S8+__c799_q23_a6__5.1__ALPS.KK1.MP7.V1.5



 BY MASUDTEC



Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 002C00BC009000550056000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0091 , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
DEV RID    : 0xD378083F3EECE9883B9E2E95B159560D
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_c799_q23_a6.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / c799_q23_a6 / NAND
FW Size : 248 MiB

Brand     : alps
ProdName  : S8+
ProdModel : S8+
Device    : c799_q23_a6
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1.5

Android Info saved

Scatter saved to : C:\Users\MASUD\Desktop\peace p4\New folder\MT6572_NAND_alps__S8+__c799_q23_a6__5.1__ALPS.KK1.MP7.V1.5

Done!
Elapsed: 00:02:46
Reconnect Power/Cable!


SAMSUNG CLON S8+ FLASH FILE FIRMWARE MT6572_NAND_alps__S8+__c799_q23_a6__5.1__ALPS.KK1.MP7.V1.5 BY MASUDTEC

SAMSUNG CLON S8+ FLASH FILE FIRMWARE MT6572_NAND_alps__S8+__c799_q23_a6__5.1__ALPS.KK1.MP7.V1.5 BY MASUDTEC

PASSWORD CALL 01911218432


SAMSUNG CLON S8+ FLASH FILE FIRMWARE MT6572_NAND_alps__S8+__c799_q23_a6__5.1__ALPS.KK1.MP7.V1.5 BY MASUDTEC