MASUDTEC.COM

2018/10/30

Kimfly ES Flash File Ref Number:3 without password cm2 red SP7731CEA_Unite-U1_6.0_Myphone-Unite_U1-Android-6.0-V1.0-20171111_Unite_U1 by masudtec

Kimfly ES Flash File Ref Number:3 


without password cm2 red 



SP7731CEA_Unite-U1_6.0_Myphone-Unite_U1-Android-6.0-V1.0-20171111_Unite_U1



 by masudtec



Ref Number:3 

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Unite U1
Model Brand : Myphone
Model Device: Unite-U1
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : Myphone-Unite U1-Android-6.0-V1.0-20171111
Model Ext   : Unite U1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1940 MiB
Saved to : C:\Users\MASUD\Desktop\kimfly es flash file\SP7731CEA_Unite-U1_6.0_Myphone-Unite_U1-Android-6.0-V1.0-20171111_Unite_U1\
Done!

Elapsed: 00:14:20

https://mega.nz/#!kC52ESAR!-RvgkocO_B-IAYBxhwmaV_dk-m0PJVFicuJigOVjbLk






2018/10/29

MAXIMUS AURA A99 FLASH FILE FIRMWARE Cm2 Read WITHOUT PASSWORD MT6580__MAXIMUS__Aura_a99__bird6580_weg_b_l__5.1__ALPS.L1.MP6.V2.3 BY MASUDTEC

MAXIMUS AURA  A99 FLASH FILE FIRMWARE



Cm2 Read WITHOUT PASSWORD 


MT6580__MAXIMUS__Aura_a99__bird6580_weg_b_l__5.1__ALPS.L1.MP6.V2.3 



BY MASUDTEC 



 Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513832334D4200758EC48DC263
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D4200758EC48DC263
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xD378083F2F2610596C2F04913C25A6A3
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : MAXIMUS
ProdName  : full_bird6580_weg_b_l
ProdModel : Aura_a99
Device    : bird6580_weg_b_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.3

[Read Ok] : preloader_bird6580_weg_b_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / bird6580_weg_b_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1565 MiB
Scatter saved to : C:\Users\masud\Desktop\maximus aura a99 red cm2\MT6580__MAXIMUS__Aura_a99__bird6580_weg_b_l__5.1__ALPS.L1.MP6.V2.3\

All done!





https://mega.nz/#!laIyWCCZ!7ijQTQVal-pHQrErCmCKfhnHWz2lAgonqNEIXi9yzME





TECNO K7 FLASH FILE FIRMWARE WITHOUT PASSWORD MT6580__TECNO__TECNO_K7__TECNO-K7__7.0__K7-H8019A-N-180124V180 BY MASUDTEC

TECNO K7 FLASH FILE FIRMWARE WITHOUT PASSWORD 




MT6580__TECNO__TECNO_K7__TECNO-K7__7.0__K7-H8019A-N-180124V180 




BY MASUDTEC


DOWUNLOD  S/N:H5N9



Wait for phone...
Phone found! [ 17 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100514536334D42039F669050159B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM36E
[eMMC] : FLASH_CID : 150100514536334D42039F669050159B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xD378083F854A61F7574FE59C9C028427
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : TECNO
ProdName  : H8019
ProdModel : TECNO K7
Device    : TECNO-K7
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : K7-H8019A-N-180124V180

[Read Ok] : preloader_rlk6580_weg_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / rlk6580_weg_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2877 MiB
Scatter saved to : C:\Users\MASUD\Desktop\TECNO K7\MT6580__TECNO__TECNO_K7__TECNO-K7__7.0__K7-H8019A-N-180124V180\

All done!

Done!
Elapsed: 00:13:21
Reconnect Power/Cable!






MASUD TELICOM
PRESENT: Moshzid Market, 2nd Floor,Zirani Bazar, Ashulia, Savar, Dhaka.
HOME TOWN: PANCHBIBI, JOYPURHAT
CELL: 01911218432
WEB: masudtec.blogspot.com
Facebook: https://www.facebook.com/masudtec
============================================

2018/10/28

Gphone GP23 flash file spd 6531E cm2 red without password by masudtec

Gphone GP23 flash file spd 6531E


 cm2 red without password 


by masudtec


Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\MASUD\Desktop\Gphone GP23 flash file spd 6531E cm2 red without password by masudtec\FLASH_DUMP.bin

Done!
Elapsed: 00:00:41

Reconnect Power/Cable!


 



https://mega.nz/#F!NPYTwAyL!JlA7lfxpC7lMh0pC1bIKmw








HUAWEI Kimfly M1 flash file without password SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M4 = by masudtec

HUAWEI Kimfly M1 flash file without password 



SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M4 =



 by masudtec







Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_32v4_oversea
Model Brand : M4
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MRA58K release-keys
Model Ext   : M4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : logo10.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1652 MiB
Saved to : C:\Users\masud\Desktop\HUAWEI Kimfly M1\SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M4\
Done!

Elapsed: 00:13:53


https://mega.nz/#!wfBj1IYJ!rEtlz9yyYVsMEu8OBttJNGyV21C-2ly6NfzFvRoAIfs







OPPO SM-X1 4G FIRMWARE FLASH FILE MT6589__4G__X1__X1__6.0__ALPS.KK1.MP5.V1.3 oppo-sm-x1-4g-firmware-flash-file without password by masudtec

OPPO SM-X1 4G FIRMWARE FLASH FILE 


MT6589__4G__X1__X1__6.0__ALPS.KK1.MP5.V1.3


 oppo-sm-x1-4g-firmware-flash-file  



without password by masudtec



Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 300001113947343092641030EBB044C2
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 110100303034473930106492C244B0EB
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xD378083FF171145C625BE06A38654902
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : 4G
ProdName  : X1
ProdModel : X1
Device    : X1
AndroidVer: 6.0
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.KK1.MP5.V1.3

[Read Ok] : preloader_eastaeon89_wet_td.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / eastaeon89_wet_td / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 705 MiB
Scatter saved to : C:\Users\masud\Desktop\oppo sm-x1\MT6589__4G__X1__X1__6.0__ALPS.KK1.MP5.V1.3\

All done!


https://mega.nz/#!dDADXIpZ!TQbBkQ1uWCtQs_tqWA0b_ZUt50Vzm-hSWl-VZyKfGG4



============================================

Symphony V100 flash file HW2 V10 100%ok without password 100% by masudtec

Symphony V100 flash file HW2 V10


without password  100%ok


by masudtec


Symphony_V100_HW2_V10




MASUD TELICOM
PRESENT: Moshzid Market, 2nd Floor,Zirani Bazar, Ashulia, Savar, Dhaka.
HOME TOWN: PANCHBIBI, JOYPURHAT
CELL: 01911218432
WEB: masudtec.blogspot.com
Facebook: https://www.facebook.com/masudtec
============================================